Heat recovery module:



boostherm 20-70 kw rduit

  • 5 models for cooling units from 1 to 70 kW (recoverable thermal capacity).
  • Stainless steel protection box.
  • Insulated double wall high pressure heat exchanger for optimal security.
  • Pre-assembled module with electrical connection for quick installation.
  • Circulation pump with internal thermal protection.
  • Scale formation LED warning.
  • Adjustable flow regulation valve.
  • Components compatible with drinking water.
  • Priority to cooling: HP safety pressure switch, NC fan relay for a trouble-free operation in case of anomaly on the heat recovery system.


Boostherm combined water tanks:


More than simple hot water buffer tanks: carefully designed to optimize heat recovery and equipped with a water diffusing stick to obtain two different temperature levels and avoid the influence of the electrical resistance in the part dedicated to heat recovery. Also equipped with a separate cold water inlet to avoid cold water by-pass during heat recovery phase.

  • Single water tank for preheated and hot water, with anti-legionella conception.
  • Epoxy-coated 3mm steel tank 7 years warranty.
  • PVC cover with 50mm insulation foam (insulation heat transfer coefficient K = 0.726 W/m2.°C).
  • Total drain orifice and quick drain valve to easily remove deposits.
  • Magnesium protection anode.
  • Connection kit including safety valve, air vent, 2 thermometers, quick drain valve and fittings.
  • Optional electrical resistance.

Boostherm water tanks can also be used as buffer tanks.
*See warranty conditions in the instructions manual.